visit us @NAB in Las Vegas
icon4 04 18th, 2012| icon3Comments Off

It’s NAB this week and, as ever, we have a strong team there spreading the word! If you’re at NAB, why not swing on by booth C1139 to find out what we’re up to?

You’ll be able to see the new Annuncicom PS1, which is ideal for use as a Broadcast production intercom, small footprint paging station and so much more…

If you’re not there, you can find out more here: http://www.barix.com/Annuncicom_PS1/1781/

If you have an application where you need to deliver an RTP stream to multiple devices and your network infrastructure or source does not support Multicast, the Barix RTP replicator software may be the right thing for you.
Intended for Barix Audio over IP solutions, but useable with about any device or application or data, this software runs on either a Barionet or an Annuncicom, receives audio on a socket, and distributes the RTP packets to a list of up to 100 destination address/port numbers. You can also send to broadcast or multicast addresses.

Run on the Barionet, the application can easily forward a 100kbps IP Audio stream at 30-50 blocks per second to more than 100 destinations, with a delay of less than 20ms ! Using Barix hardware for this purpose has a lot of benefits: PC-Free technology, well below 4W power consumption, no moving parts, no themral issues, operational within 5 seconds of power up.

Customers of Barix use that solution since years to generate thousands of RTP streams to distribute IP Audio streams in real time.

.. and if you need to broadcast RTP in a “remote” network, the solution can be used as well … just configure only one target, the broadcast address, install the device in the remote location, and stream RTP to its receiving port. The RTP stream will be rebroadcasted in the destination network (multicast supported too, of course).

Questions ? Contact us !
Johannes